Friday, 13 March 2020

Tips To Consider While Choosing Septic Tanks


Septic tanks find applications for domestic purposes. If you live in the countryside or rural areas, you will discover septic tanks as the alternative for the sewer system. Septic tanks get built adjacent to or behind the house. All the wastewater comes to the septic tank for filtration and drainage in the designated area. But how can you choose the best septic tank? Some tips for choosing Septic Tanks in Saskatchewan are as follows:

Check the size you buy

There are numerous sizes of septic tanks available. The size of the septic tanks will depend on the consumption of water that a family uses daily. The tank should be spacious enough for the sewage to process appropriately.

Designed with purpose

There are mainly two types of designs, namely; Pressure type system and Gravity system. The pressure type system is used when it needs to get installed in a rough and coarse surface. Whereas the Gravity system is useful to install in soil areas. The sewage water, in turn, is soaked up in the soil and helps in better soil fertilization.

Attaching the pump to the tank

There are two types of pumps, one is the Turbine pump, and the other is the centrifugal pump. Of the two Turbine pump is better as it lasts long. But it is costlier than a centrifugal pump. You need to select as per your needs.

Ending thoughts

It would help if you always opted for the best option when it comes to sanitation. A little investment in installing Septic Tanks in Saskatchewan can prove to be a smart and clean decision.

Friday, 6 March 2020

The Functions Of Grease Interceptor Tanks


The kitchen is the space where food gets cooked, and it is the same space where fats, oils, greases are found. If you talk about commercial kitchens, then you are left with no words! This is where grease inceptor tanks are used. The Grease Interceptor Tanks in Saskatchewan collects wastewater clogged with FOG (fats, oils, greases) from all the appliances for the kitchen and treats the water before it drains into the municipal water system. Thus, it does not allow the municipal water system to get clogged as it differentiates the grease layer from the wastewater.

The systematic working of a grease interceptor tank

In commercial kitchens, food is being cooked continuously, hence, producing continuous FOG. It would have been tough to deal with this issue if grease interceptor tanks were not there!

Halfway up of the tank, there lies a pipe through which water enters the grease inceptor. The solid wastes like food debris sink and accumulate as sediments below the tank. The fats, oils and grease float to the top because they are lighter than water. Now when the substantial wastes and greasy parts get separated from water, the clean water flows out through a pipe located in the middle of the tank. The top fatty layer is often removed with the help of a skimmer and deposited in a repository just beside the unit. The solid debris also gets cleaned at a specific interval of time.

Signing off

The Grease Interceptor Tanks in Saskatchewan are of great use to society as an ideal solution to treat wastewater. The creation of such environment-friendly equipment should be encouraged.

Search This Blog

Powered by Blogger.